Stainless Steel 3-PC Type ISO5211 High Mounting Pad 1000WOG
Threaded Ball Valve
Product introduction:
Ball valves are generally considered best suited for direct opening
and closing, but recent developments have designed them for
throttling and flow control. The main characteristics of ball valve
is its compact structure, easy to operate and maintenance, suitable
for water, solvent, acid and natural gas and other general working
media, but also suitable for harsh working conditions of media,
such as oxygen, hydrogen peroxide, methane and ethylene. Ball valve
body can be integral, can also be combined.
This ball valve with 3-piece construction with ISO5211 mounting
pad, can be matched with a lever for manual operation, also to be
installed with pneumatic actuator / electric actuator, and
stainless steel raw material for suitable for water, steam, oil and
weak corrosive mediums application, and its fluid resistance is
very small, make resistance coefficient is equla to that of a pipe
segment of the same length, so it is widely used in small size
pipeline and equipment.
Product technical parameters:
| Nominal Diameter DN (mm) | DN15-DN100 |
| Nominal Pressure PN (MPa) | 1.6 - 6.4 |
| Test Pressure (MPa) | Strength (water) | 2.4 - 9.6 |
| Enclose (Water) | 1.76 - 7.04 |
| Main Components | Body | CF8, CF8M, |
| Valve ball | CF8, CF8M, |
| Seat | PTFE |
| Packing | Soft graphite, PTFE |
| Working temperature | ≤150℃ |
| Medium suitable | Water, oil, steam and weak corresive mediums |
| Connection | BSP NPT, weldable |
Product features:
1. Simple structure, small size, and light weight.
2. Tight and reliable, the sealing surface material of the ball
valve is widely used in plastic, with good sealing performance, and
has also been widely used in vacuum systems.
3. Easy to operate, quick to open and close, with only a 90 °
rotation from full open to full close, facilitating remote control.
4. Easy to maintain, the ball valve has a simple structure, and the
sealing ring is generally movable, making disassembly and
replacement more convenient.
5. When fully open or fully closed, the sealing surfaces of the
ball and valve seat are isolated from the medium. When the medium
passes through, it will not cause erosion of the valve sealing
surface.
